Tasman Sea commercial desalination systems feature a compact and accessible design. The Tasman Sea includes the patented Cycron pre-filtration which provides 200 square feet of active filtration area for improved water quality and extended membrane life, solid state salinity controller, multi-media filter, high efficiency booster pump, feed and product flow meters, and a unique membrane cleaning system for easier maintenance. Tasman Sea produces from 5,500 to 21,000 U.S. gallons (20,820 to 79,493 liters) per day or 229 to 875 U.S. gallons (867 to 3,312 liters) per hour of fresh, pure water. | TASMAN SEA SPECIFICATIONS |  | Performance:
Rated Performance / Product Water Produced: +-15% at 820 PSI / 56 BAR, 77oF / 25oC & 35,000 PPM TDS typical sea water
| Model # | Per Hour | Per Day | 21m3/S1
38m3/S1
53m3/S1
64m3/D1
72m3/D1
79m3/D1
38m3/S2
64m3/S2
79m3/S2 | 229 gal/867 lit
417 gal/1,577 lit
583 gal/2,208 lit
708 gal/2,681 lit
792 gal/2,997 lit
875 gal/3,312 lit
417 gal/1,577 lit
708 gal/2,681 lit
875 gal/3,312 lit | 5,500 gal/20,820 lit
10,000 gal/37,854 lit
14,000 gal/52,996 lit
17,000 gal/64,352 lit
19,000 gal/71,923 lit
21,000 gal/79,493 lit
10,000 gal/37,854 lit
17,000 gal/64,352 lit
21,000 gal/79,493 lit |
Salt Rejection (Chloride Ion): Minimum 99.2%, Average 99.5%
Product Water Temperature: Ambient to feed water temperature
Salinity Monitoring: Automatic electronic monitoring. Temperature compensated with the solid state continuous "Bar LED" readout. The salinity monitoring components of the system give a continuous TDS readout in micromhos per cubic centimeter, are temperature compensated and of a fail safe design.
Salinity Range: Designed for Seawater use up to 50,000 PPM TDS (NaCl) (typical seawater salinity is 35,000 ppm)
Temperature Range: Max. 122oF / 50 oC, Min. 33oF / .5oC
System Feed Water: Flow: 30 gpm / 114 lpm
(depending on system)
Reverse Osmosis Membrane: Selected High Rejection/High Yield aromatic tri-polyamid, thin film composite, spiral wound, single pass, high rejection reverse osmosis membrane element.
Chlorine Tolerance: 0.1 PPM
pH Range: 3-11 (typical seawater pH is 8)
System Pressure: Feed Water: Maximum 50 psi / 3.45 bar / 3.5 Kg/cm2
System Operation: Seawater nominal 800 psi / 57 bar / 58 Kg/cm2 Brackish Varies w/PPM
Weight: | | 21m3/S1
38m3/S1
53m3/S1
64m3/D1
72m3/D1
79m3/D1
38m3/S2
64m3/S2
79m3/S2 | 1900 lbs / 864 Kg
2000 lbs / 909 Kg
2100 lbs / 954 Kg
2300 lbs / 1045 Kg
2400 lbs / 1090 Kg
2500 lbs / 1136 Kg
2000 lbs / 909 Kg
2200 lbs / 1000 Kg
2400 lbs / 1090 Kg |
External Installation Water Connections: Pipe sizes to be supplied by the installer for connection of the Sea Recovery supplied components. The below pipe threads are all American Standard.
| Feed Inlet: | 1-1/2" ANSI Threaded Flange | | Brine Discharge: | 1-1/2" ANSI Threaded Flange | | Product: | 1" ANSI Threaded Flange |
Electrical Requirements: (HP = Horse Power; FLA = Full Load Amperes; LRA = Locked Rotor Amperes - Start Up)
Booster Pump Electric Motor: | Hz | VAC | HP | FLA | LRA | | 50 | 220 | 1.5 | 6 | 38 | | 50 | 380 | 1.5 | 3 | 19 | | 50 | 415 | 1.5 | 3 | 18 | | 60 | 208 | 1.5 | 6 | 38 | | 60 | 230 | 1.5 | 5 | 34 | | 60 | 460 | 1.5 | 2.5 | 17 | High Pressure Pump Electric Motor: | Hz | VAC | HP | FLA | LRA | | 50 | 220 | 30 & 2 | 62.4 | 390 | | 50 | 380 | 30 & 2 | 31.2 | 198 | | 50 | 415 | 30 & 2 | 29 | 180 | | 60 | 208 | 30 & 2 | 63.4 | 390 | | 60 | 230 | 30 & 2 | 57.8 | 370 | | 60 | 460 | 30 & 2 | 28.9 | 185 | Recommended Circuit Breaker: The final system configuration may have a large or different size Booster Pump therefore size your Circuit Breaker accordingly. The below chart is an approximation assuming standard pumps. Operating Voltage Hz & Phase | Rec. Circuit Breaker Size
| 220 VAC, 50 Hz, Three Phase
380 VAC, 50 Hz, Three Phase
415 VAC, 50 Hz, Three Phase
208 VAC, 60 Hz, Three Phase
230 VAC, 60 Hz, Three Phase
460 VAC, 60 Hz, Three Phase
| 90 Amperes
50 Amperes
50 Amperes
90 Amperes
90 Amperes
50 Amperes | |
|
