North Sea commercial desalination systems are rugged and versatile and the top choice of many oil industry companies, hotels, and cruise ships for their reverse osmosis needs. These light weight and space-saving footprint desalinators are constructed with epoxy powder-coated frames. North Sea produces from 11,000 to 44,000 U.S. gallons (41,639 to 166,558 liters) per day or 458 to 1,833 U.S. gallons (1,735 to 6,940 liters) per hour of fresh, pure water.

NORTH SEA SPECIFICATIONS

Performance: Rated Performance / Product Water Produced: +-15% at 820 PSI / 56.6 BAR, 77oF / 25oC & 35,000 PPM TDS typical sea water Model # Per Hour Per Day 42m3/S2 76m3/S2 98m3/S2 121m3/D2 132m3/D2 144m3/D2 144m3/D3 159m3/D3 167m3/D3 458 gal/1,735 lit 833 gal/3,155 lit 1,083 gal/4,101 lit 1,333 gal/5,047 lit 1,458 gal/5,520 lit 1,583 gal/5,994 lit 1,583 gal/5,994 lit 1,750 gal/6,624 lit 1,833 gal/6,940 lit 11,000 gal/41,639 lit 20,000 gal/75,708 lit 26,000 gal/98,420 lit 32,000 gal/121,133 lit 35,000 gal/132,489 lit 38,000 gal/143,845 lit 38,000 gal/143,854 lit 42,000 gal/158,987 lit 44,000 gal/166,558 lit Salt Rejection (Chloride Ion): Minimum 99.2%, Average 99.6% Product Water Temperature: Ambient to feed water temperature Salinity Monitoring: Automatic electronic monitoring. Temperature compensated with the solid state continuous "Bar LED" readout. The salinity monitoring components of the system give a continuous TDS readout in micromhos per cubic centimeter, are temperature compensated and of a fail safe design. Salinity Range: Designed for seawater use up to 50,000 PPM TDS (NaCl) (typical seawater salinity is 35,000 ppm) Temperature Range: Max. 122oF / 50 oC, Min. 33oF / .5oC System Feed Water: Flow: 45-65 gpm / 170-246 lpm (depending on system) Reverse Osmosis Membrane: Selected High Rejection/High Yield aromatic tri-polyamid, thin film composite, spiral wound, single pass, high rejection reverse osmosis membrane element. Chlorine Tolerance: 0.1 PPM pH Range: 3-11 (typical seawater pH is 8) System Pressure: Feed Water: Maximum 50 psi / 3.45 bar / 3.5 Kg/cm2 System Operation: Seawater nominal 820 psi / 56.6 bar / 58 Kg/cm2 Brackish Varies w/PPM Weight: Model Number Weight 42m3/S2 76m3/S2 98m3/S2 121m3/D2 132m3/D2 144m3/D2 144m3/D3 159m3/D3 167m3/D3 3700 lbs / 1678 Kg 4000 lbs / 1814 Kg 4300 lbs / 1950 Kg 4800 lbs / 2177 Kg 5100 lbs / 2313 Kg 5400 lbs / 2449 Kg 5400 lbs / 2449 Kg 5850 lbs / 2653 Kg 6300 lbs / 2857 Kg External Installation Water Connections: Pipe sizes to be supplied by the installer for connection of the Sea Recovery supplied components. The below pipe threads are all American Standard. Feed Inlet: 1-1/2" ANSI Threaded Flange Brine Discharge: 1-1/2" ANSI Threaded Flange Product: 1" ANSI Threaded Flange Electrical Requirements: (HP = Horse Power; FLA = Full Load Amperes; LRA = Locked Rotor Amperes - Start Up) Booster Pump Electric Motor: Hz VAC HP FLA LRA 50 220 3 8 64 50 380 3 4 32 50 440 3 4 30 60 208 3 9 64 60 230 3 8 58 60 460 3 4 29 Hz VAC HP FLA LRA 50 220 5 13 108 50 380 5 7 54 50 440 5 7 52 60 208 5 14 110 60 230 5 13 100 60 460 5 7 50 High Pressure Pump Electric Motor: Hz VAC HP FLA LRA 50 220 50 120 792 50 380 50 70 458 50 440 50 60 396 60 200 50 120 648 60 208 50 120 877 60 230 50 120 618 60 460 50 60 309 Recommended Circuit Breaker: The final system configuration may have a large or different size Booster Pump therefore size your Circuit Breaker accordingly. The below chart is an approximation assuming standard pumps. Operating Voltage Hz & Phase Rec. Circuit Breaker Size 220 VAC, 50 Hz, Three Phase 380 VAC, 50 Hz, Three Phase 440 VAC, 50 Hz, Three Phase 200 VAC, 60 Hz, Three Phase 208 VAC, 60 Hz, Three Phase 230 VAC, 60 Hz, Three Phase 460 VAC, 60 Hz, Three Phase 150 Amperes 90 Amperes 75 Amperes 160 Amperes 160 Amperes 150 Amperes 75 Amperes