Search in the website
|
|
Home » Sea Recovery Watermakers » Aqua Whisper » Modular SRC AWM 1800 1
|
| Naam | Modular SRC AWM 1800 1 |
| Prijs | € 0 |
| |
Email a friend
| AQUA WHISPER SPECIFICATIONS |  | Performance:
Rated Performance / Product Water Produced: +-15% at 820 PSI / 57 BAR, 77oF / 25oC & 35,000 PPM TDS typical sea water
| Model # | Per Hour | Per Day |
AW 1800-2 |
75 gal/284 lit |
1800 gal/6,814 lit |
Salt Rejection (Chloride Ion): Minimum 99.2%, Average 99.4%
Product Water Temperature: Ambient to feed water temperature
Salinity Monitoring: Automatic electronic monitoring. Temperature compensated with the solid state continuous "Bar LED" readout. The salinity monitoring components of the system give a continuous TDS readout in micromhos per cubic centimeter, are temperature compensated and of a fail safe design.
Salinity Range: Designed for Seawater use up to 50,000 PPM TDS (NaCl) (typical seawater salinity is 35,000 ppm)
Temperature Range: Max. 122oF / 50oC, Min. 33oF / .5oC
System Feed Water: Flow: 3.0 - 4.2 gpm / 11.4 - 15.9 lpm
(depending on system)
Reverse Osmosis Membrane: Selected High Rejection/High Yield aromatic tri-polyamid, thin film composite, spiral wound, single pass, high rejection reverse osmosis membrane element.
Chlorine Tolerance: 0.1 PPM
pH Range: 3-11 (typical seawater pH is 8)
System Pressure: Feed Water: Maximum 35 psi / 2.41 bar / 2.46 Kg/cm2
System Operation: Seawater nominal 820 psi / 56.5 bar / 57.66 Kg/cm2 Brackish Varies w/PPM
Weight: | | Compact |
AW 1800-2
|
170 lbs/77 Kg |
170 lbs/77 Kg |
External Installation Water Connections: Pipe sizes to be supplied by the installer for connection of the Sea Recovery supplied components. The below pipe threads are all American Standard.
| Feed Inlet: | 3/4" FNPT Female National Pipe Thread | | Brine Discharge: | 1/2" FNPT Female National Pipe Thread | | Product: | 3/8" MNPT Male National Pipe Thread |
Electrical Requirements: (HP = Horse Power; FLA = Full Load Amperes; LRA = Locked Rotor Amperes - Start Up)
High Pressure Pump Electric Motor:
Models 450-1 & 900-2:
| Phase | Hz | VAC | HP | FLA | LRA | | Single | 50 | 110 | 2.2 | 21 | 121 | | Single | 50 | 220 | 2.2 | 11 | 61 | | Three | 50 | 220 | 3.0 | 9 | 78 | | Three | 50 | 380 | 3.0 | 5 | 39 | | Single | 60 | 115 | 2.2 | 18 | 94 | | Single | 60 | 230 | 2.2 | 9 | 47 | | Three | 60 | 230 | 3.0 | 8 | 70 | | Three | 60 | 460 | 3.0 | 4 | 35 |
Models 700-1 & 1400-2 and 900-1 & 1800-2:
| Phase | Hz | VAC | HP | FLA | LRA | | Single | 50 | 110 | 2.2 | 21 | 121 | | Single | 50 | 220 | 2.2 | 11 | 61 | | Three | 50 | 220 | 3.0 | 9 | 78 | | Three | 50 | 380 | 3.0 | 5 | 39 | | Single | 60 | 115 | 2.6 | 21 | 109 | | Single | 60 | 230 | 2.6 | 11 | 55 | | Three | 60 | 230 | 3.0 | 8 | 70 | | Three | 60 | 460 | 3.0 | 4 | 35 |
Booster Pump & Feed Water Electric Motors:
| Phase | Hz | VAC | HP | FLA | LRA | | Single | 50/60 | 115 | .5 | 7.4 | 34 | | Single | 50/60 | 220/230 | .5 | 3.7 | 17 | | Three | 50/60 | 220/230 | .5 | 2 | 12 | | Three | 50/60 | 380/460 | .5 | 1 | 6 |
Recommended Circuit Breaker: The final system configuration may have a large or different size Booster Pump therefore size your Circuit Breaker accordingly. The below chart is an approximation assuming standard pumps.
Operating Voltage Hz & Phase | | Rec. Circuit Breaker Size | 115 VAC, 50/60 Hz, 1 Phase
230 VAC, 50/60 Hz, 1 Phase
208/230 VAC, 50/60 Hz, 3 Phase
380 VAC, 50/60 Hz, 3 Phase
460 VAC, 5060 Hz, 3 Phase
| | 35 Amperes
15 Amperes
10 Amperes
7.5 Amperes
7.5 Amperes | |
|
